Firmware update for pulse counter has been released

2018-07-24 05:58:02 MSK New firmware version is for Vega SI-13 pulse counter.
You can download new firmware on the product page in "Downloads" section.
Vega SI-13-232 0.12 version
Vega SI-13-485 0.12 version:
- The ability to initiate the data transfer to the LoRaWAN network by an external device is added.

Firmware update for modem has been released

2018-07-20 11:12:55 MSK New firmware version is for Vega GM-2 LoRaWAN modem.
You can download new firmware on the product page in "Downloads" section.
Vega GM-2 0.3 version:
- Exchange protocol is reworked, settings out from the main packet, packet of outputs control is corrected;
- Some occurs were fixed;
- Setting of decimal places number was added;
- Black box rework to FIFO;
- Packets are transfering with fixed period now;
- Time interval between time correction requests is increased up to a week;
- Just after a connection to network the device sends the time correction request.

Vega LoRaWAN Configurator was updated to 1.0.16 version

2018-07-20 06:56:01 MSK List of changes:
1. Kamstrup multicall 801 support was added at the MBUS-1 and MBUS-2;
2. SVE-1 autotests were changed;
3. GNSS module activity setting was added for SH-1;
4. Units of measurement were added on the SVE tab;
5. New settings were added for SI-11, so it configurating without switches now.

Firmware updates for pulse counters have been released

2018-07-19 10:47:20 MSK New firmwares versions are for Vega SI-11 and Vega SI-21 pulse counters.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega SI-11 1.0 version:
- Support of frequency bands AU, KR, IN, AS, US, RU is added;
- Added the ability to change registration keys;
- Added black box function. Now packets are re-transmitted in case of unsuccessful sending, if confirmation is enabled;
- Time zone setting is added. Time zone is used for data collection;
- The periods of data collection and data transmission are divided;
- Added ability to collect and transmit data at short intervals (from five minutes);
- The function of automatic time correction is added;
- Fixed a bug that occurred when data transmitted in ABP mode;
- Removed configuration via switches. Now all the settings are done through the configurator;
- The automatic re-join function is added. If the connection is unsuccessful, the device will try again after 6 hours;
- If more than five unsent packets are stored in the device's memory, the device will attempt to reconnect;
Vega SI-21 0.11 version:
- Fixed a bug that occurred when generating a request for time correction;
- Fixed a bug that occurred when trying to reconnect to the network.

Firmware update for pulse counter has been released

2018-07-10 11:17:29 MSK New firmware version is for Vega SI-21 pulse counter.
You can download new firmware on the product page in "Downloads" section.
version 0.9:
- Fixed a bug that made it impossible to send data when receiving confirmation in the second receiving window in some cases;
version 0.10:
- Fixed bug when transferring data in ABP mode.

Announcement of mass deletion of data and devices from the server

2018-07-10 10:05:44 MSK Dear colleagues! Over the past year, a lot of temporary accounts and devices appeared on our IOT demo server.
It's time to put order on the server for your and our convenience and pleasant cooperation.
On July 20, we will remove all users and all devices from the server. If you still want to save your account, please email us at info@iotvega.com with the topic "General cleaning".

IOT Vega TimeCorrector - a new application

2018-07-09 12:44:49 MSK TimeCorrector is designed to automatically correct the internal clock of end devices when they are communicated with server. The TimeCorrector application works in conjunction with the IOT Vega Server, so it can independently adjust the time on the devices without user intervention. More information about the application can be found on the product page.

IOT Vega Notifier - a new application

2018-07-09 12:21:03 MSK With the new IOT Vega Notifier application, users can receive notifications from end devices on their smartphone in the form of SMS or voice messages. Texts for SMS and voice messages are set for each device individually through the IOT Vega Pulse application. More information about the application can be found on the product page.

IOT Vega Pulse was updated to 1.1.5 version

2018-07-09 10:55:34 MSK List of changes:
1. The coefficient of transformation was added in SI-13;
2. Added the ability to hide the WS server selection button;
3. Сompletely redesigned "Reports" section;
4. Added the ability to generate reports for SI-11, SI-13, SI-21, TP-11, TD-11, MC0101, AS0101, MS0101, SS0101, Water meters SVE, Electricity meters, GM-2, LM-1;
5. Bags fixed;
6. Some types of channels are renamed.
A detailed list of changes is specified in the revision history of the application.

Firmware updates for M-BUS converters have been released

2018-06-14 04:55:30 MSK New firmwares versions are for M-BUS-1 and M-BUS-2 converters.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega M-BUS-1 0.18 version
Vega M-BUS-2 0.8 version:
- KAMSTRUP MULTICAL 801 heat meter is supporterd.

IOT Vega Pulse was updated to 1.1.4 version

2018-06-01 10:26:16 MSK List of changes:
1. Added support for electric meters (SPbZIP);
2. Added support for Smart-МС0101;
3. Added support for Smart-МS0101;
4. Added support for Smart-AS0101;
5. Added support for Smart-SS0101;
6. Added support for SVE-1;
7. Added support for ТD-11;
8. Added support for ТP-11;
9. Added support for GM-2;
10. Added support for LM-1;
11. Added support for SI-13 (Mercury);
12. Optimizing the application to increase performance;
13. Changes in the visual design of the application;
14. New functionality added.
A detailed list of changes is specified in the revision history of the application.

Vega LoRaWAN Configurator was updated to 1.0.13 version

2018-06-01 10:01:17 MSK List of changes:
1. New Vega LM-1 device is supported;
2. New parameters are added to SVE-1 settings.

Firmware updates for devices have been released

2018-05-18 06:06:18 MSK New firmwares versions are for Vega SI-21, Vega SI-13-232, Vega SI-13-485, M-BUS-1 and M-BUS-2 devices.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega SI-21 0.8 version:
- Added support for frequency plans AU, KR, IN, AS, US, RU.
- Added the ability to change registration keys.
- The function of the black box is added. Now packets are re-transmitted in case of unsuccessful sending, if confirmation is enabled.
- Time zone setting is added. Time zone is used when data is accumulated.
- The periods of data collection and data transmission are divided.
- The ability to accumulate and transmit data at short intervals (from five minutes).
Vega SI-13-232 0.11 version
Vega SI-13-485 0.11 version:
- Fixed bug when configuring an interface with two stop bits and parity.
M-BUS-1 0.17 version
M-BUS-2 0.7 version:
- Added support for the Weser WHM heat meter.

Vega LoRaWAN Configurator was updated to 1.0.12 version

2018-05-17 09:43:02 MSK List of changes:
1. Configurator asks the connected device to support different frequency plans now;
2. New parameter is added to SI-11 and SI-21 settings and that is data collection period;
3. New connectable devices for M-BUS-1 are added and there are Itelma Berill, Danfoss sonometer 500, Teplovodomer ELF-M and WESER;
4. New GM-2 device is supported - it is Elster gas meters Radio Modem;
5. An abillity to change end devices keys is added;
6. Time zone setting for SI-21 is added;
7. New SH-1 device is supported;
8. Corrections were made to the configuration of the SI-13 interface;
9. New Smart-SS0101 device is supported - it is a Smoke Sensor with the fire alarm.

Firmware updates for M-BUS converters have been released

2018-05-03 06:03:21 MSK New firmwares versions are for Vega M-BUS-1 and M-BUS-2 converters.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega M-BUS-1 0.16 version
Vega M-BUS-2 0.6 version:
- Heat meter "Elf-M" is supported now.

Firmware update for M-BUS-1 converter has been released

2018-04-04 13:27:07 MSK New firmware version is for M-BUS-1 converter.
You can download new firmware on the product page in "Downloads" section.
M-BUS-1 0.15 version:
- Danfoss Sonometer 500 heat meter is supported now.

We invite you to Vega-Absolute stand at the exhibition in Moscow

2018-04-04 07:50:31 MSK From April 24th to 27th, there are two largescale exhibitions will be held in Moscow in the Expocenter, where Vega-Absolute LLC takes part:
NAVITECH-2018 10th Annivarsary International Exhibition Navigation Systems, Technologies and Services
SVIAZ-2018 30th Anniversary International Exhibition of Information and Communications Technologies
We invite you to visit our stand, located at: Pavilion 8 (2nd level), Hall 1, stand No. 81B52.
The stand will be presented with equipment for monitoring transport, the Internet of things, as well as the new Smart series for smart homes. There will be many interesting things!

Firmware update for converter has been released

2018-03-20 06:50:35 MSK New firmware version is for M-BUS-1 converter.
You can download new firmware on the product page in "Downloads" section.
M-BUS-1 0.14 version:
- The binding of the converter to the device connected via the M-BUS interface has been changed. Instead of the device type (water meter, heat meter) the converter is attached to its model (for example, heat meter "Teplochet-1", heat meter "Beryl STE21.20"). Now all ten devices connected to the converter must be of the same type.

Firmware update for converter 4-20mA has been released

2018-03-13 10:26:00 MSK New firmware version is for Vega TP-11 converter.
You can download new firmware on the product page in "Downloads" section.
Vega TP-11 0.6 version:
- The warm-up function of the device connected via the 4-20 mA interface before sending the packets was corrected. Now this function is inactive when sending packets that do not require polling of the connected device.

Firmware update for end device has been released

2018-02-19 13:03:46 MSK New firmware version is for Vega TD-11 temperature sensor.
You can download new firmware on the product page in "Downloads" section.
Vega TD-11 0.5 version:
- The logic of operation of the door opening sensor is changed. Now the sensor works both on opening and closing the door.

Firmware update for pulse counter has been released

2018-02-15 09:46:46 MSK New firmware version is for Vega SI-21 pulse counter.
You can download new firmware on the product page in "Downloads" section.
Vega SI-21 0.7 version:
- Fixed an error of detecting thermistor breakage.

Firmware updates for end devices have been released

2018-02-12 11:35:22 MSK New firmware versions are for Vega SI-21 and Vega TP-11 devices.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega SI-21 0.6 version:
- The restrictions on frequencies more than 870 MHz are removed, now the device can work in the ranges AS915 and AU923;
- Fixed a potential error in the SPI that could lead to a hangup on HAL_MAX_DELAY;
- Added support for a new thermistor B3950.
Vega TP-11 0.5 version:
- New parameter "Sensor startup time" was added.

Vega LoRaWAN Configurator was updated to 1.0.11 version

2018-02-12 11:20:34 MSK List of changes:
1. New device Betar Vega SVE1 was added;
2. New temperature resistive sensor B3950 was supported for TD-11 and SI-21;
3. New parameter was added for TP-11 is "Sensor startup time".

Firmware update for network tester has been released

2018-02-01 07:47:34 MSK New firmware version is for Vega TS-11 network tester.
You can download new firmware on the product page in "Downloads" section.
Vega TS-11 1.2.0 version:
- Added the ability to customize the user's frequency plan;
- Added data rate setting (DR);
- Added adaptive data rate setting (ADR);
- Fixed minor device errors.

Firmware updates for end devices have been released

2018-01-30 13:04:30 MSK New firmwares versions are for Vega TD-11, Vega TP-11 and Vega M-BUS-1 end devices.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega TD-11 0.4 version
Vega TP-11 0.4 version
Vega M-BUS-1 0.13 version:
- Fixed an error in the initialization of the outputs, which could lead to increasing power consumption in the "sleep" mode.

IOT Vega Server was updated to 1.1.5 version

2018-01-16 07:14:12 MSK List of changes:
1. Modernization of the algorithm for working with class C devices. Due to ambiguous behavior of devices, the server does not send data to the receiving window between the end of sending and the beginning of the first receiving window. Other improvements were made to improve the reliability of the server working with class C devices;
2. Fixed an error of work with database because of which there was no modification of user data (manage_device_appdata command);
3. The work on self-testing and collection of information about the failures in the server's work has been continued. Now the server accumulates information of this kind and passes it to the Vega-Absolute company developers (if the option to send anonymous reports is allowed, see details "IOT Vega Server Manual rev09");
4. When you switch from a local database to an external one, when you start the server for the first time, all data from the local database will be moved to the external database;
5. Reduced the output of debugging information to the console and LOG file;
6. There is a new version of the server assembly - is for the ARM architecture. Now the server can be started directly on the gateway.

IOT Vega Pulse was updated to 1.1.3 version

2018-01-11 13:19:24 MSK List of changes:
1. Fixed a bug of the recorded alarms number output;
2. Fixed a bug of channel binding if the selected type does not have a transformation coefficient;
3. Fixed a bug of readings calculation, in case when the device "Electric meter" type is change on another type;
4. Fixed a bug of negative temperature displaying;
5. Fixed a transformation coefficient resetting;
6. Fixed a bug of the alarms report;
7. Fixed temperature chart;
8. Rooms sorts by "NaturalSort" now;
9. Changed the appearance of the selected and current day on the calendar;
10. The device type icon "Gas meter" was aligned in the navigation panel;
11. Added notification when data limit exceeded;
12. The interaction algorithm of the authorization page with the config.js file was changed.

Firmware update for TP-11 converter has been released

2018-01-10 05:34:54 MSK New firmware version for Vega TP-11 is available on the product page in "Downloads" section.
Vega TP-11 0.3 version:
- Added new data transmission periods are equal to 1, 3, 5, 10, 15 and 30 minutes

Vega LoRaWAN Configurator was updated to 1.0.10 version

2018-01-10 05:26:31 MSK List of changes:
1. New data transmission periods are added for TP-11 - 1, 3, 5, 10, 15 and 30 minutes.

IOT Vega Server was updated to 1.1.4 version

2017-12-21 12:35:56 MSK List of changes:
1. Fixed issues with class C devices that could hang the device handler;
2. Work algorithms with gateways which transmit data via 3G are improved;
3. Added function for A class devices which allows to send data at the second receiving window if at the first receiving window data sending was unsuccessful;
4. Functional for work with external databases is added which for that you need to set up configuration file.

IOT Vega Admin Tool was updated to 1.1.2 version

2017-12-18 13:18:57 MSK List of changes:
1. Fixed a map error when there are no base stations with coordinates.
2. The presence of demo_user in the config.js file is optional now.
3. The time-lag option has been fixed. Previously, gaps were fixed during initialization, and were not updated.
4. The updated API command alter_user_resp is supported.
5. Fixed time period "For yesterday".
6. Changes in the "Regional settings" panel. If Frequency is set to 0, the channel mask is automatically equal to false.
7. Maximum number of logs in the console is equal to 1000.
8. The preset possible values ​​of "Preferred transmit power" have been changed. 10-> 11. 7-> 8.
9. The third-party devices overlimit error has been processed.
10. Minor changes.

IOT Vega Pulse was updated to 1.1.2 version

2017-12-18 13:18:40 MSK List of changes:
1. The presence of demo_user in the config file is optional.
2. Time hints were added.
3. Fixed bug of the "alarm summary" report.
4. Added a conversion ratio to devices such as "Electric meter".
5. Low battery indicator was added.
6. The time-lag option has been fixed. Previously, gaps were fixed during initialization, and were not updated.
7. The updated API command alter_user_resp is supported.
8. Fixed time period "For yesterday".
9. Minor changes.

Vega LoRaWAN Configurator was updated to 1.0.9 version

2017-12-07 04:46:55 MSK List of changes:
1. New end devices added.

IOT Vega Server was updated to 1.1.3 version

2017-12-06 12:59:07 MSK List of changes:
1. Improved the algorithm for selecting a gateway to send data to the device. Now the choice is based on SNR data and gateway ping;
2. Work was carried out to optimize the time intervals used when sending data to the device. The probability of data delivery to the device has increased;
3. Fixed an error that occurred when adjusting the speed and frequency of the device second receiving window.

Firmware update for M-BUS-1 has been released

2017-12-06 12:57:52 MSK New firmware version is for Vega M-BUS-1.
You can download new firmware on the product page in "Downloads" section.
Vega M-BUS-1 0.12 version:
- Fixed an error that caused double sending the same packet when polling utilities meters at the serial address

Firmware update for temperature sensor has been released

2017-11-22 13:33:54 MSK New firmware version is for Vega TD-11.
You can download new firmware on the product page in "Downloads" section.
Vega TD-11 0.3 version:
- Fixed a potential error that caused the device could consume an increased current in sleep mode.

Firmware updates for devices have been released

2017-11-21 07:47:01 MSK New firmwares versions are for Vega M-BUS-1 and Vega TD-11 devices.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega MBUS-1 0.8 version:
- Fixed a bug that occurred when polling utilities meters at the serial address.
Vega TD-11 0.8 version:
- Now, thermistor's open or faulty is indicated by a packet with -1000 value instead of 1500;
- The error in determining the configuration "Send an alarm message to the security input:" is fixed. The "open" setting was defined as "short" and vice versa.

Vega LoRaWAN Configurator was updated to 1.0.8 version

2017-11-17 06:20:51 MSK List of changes:
1. Temperature sensor type setting for SI-21 added.

Firmware update for SI-21 has been released

2017-11-17 05:58:53 MSK You can download new firmware on Vega SI-21 page in "Downloads" section.
Vega SI-21 0.4 version:
- Fixed a bug with temperature determination by external sensor

Vega LoRaWAN Configurator was updated to 1.0.7 version

2017-11-10 05:24:08 MSK List of changes:
1. Warranty packet counter added.

Firmware updates for pulse counters have been released

2017-11-10 05:20:52 MSK New firmwares versions are for Vega SI-11, Vega SI-12, Vega SI-13-232, Vega SI-13-485 and Vega SI-21 pulse counters.
You can download new firmware on the corresponding product page in "Downloads" section.
Vega SI-11 0.8 version
Vega SI-12 0.8 version
Vega SI-13-232 0.8 version
Vega SI-13-485 0.8 version
Vega SI-21 0.3 version:
- Fixed an error of inccorect pulse counting on security inputs.

Firmware update for M-BUS-1 has been released

2017-11-02 07:24:36 MSK New firmware version is for M-BUS-1 converter.
You can download new firmware on the product page in "Downloads" section.
VEGA M-BUS-1 0.10 version:
- Added survey support at the transparent mode;
- Work with heat meters is improved, there are more models are supported now;
- Information about data reading process from the connected device is output to the log now;
- Changed algorithm for messages downloading from the black box, it is LIFO now;
- Fixed an error leading to spontaneous desconnection from the configarator;
- Non-resettable packet counter is added;
- Fixed an error that was occurring after firmware updating when settings are first time saving;
- Fixed an error blocking the switch to the sleep mode when USB disconnection is incorrectly;
- Now EU-868 frequency band has a full frequency set by default;
- Analysis of the incoming packets length is reworked.

Firmware updates for end devices have been released

2017-11-01 06:02:12 MSK New firmwares versions is for SI-11, SI-12, SI-13-232, SI-13-485, SI-21 pulse counters and also for TP-11 and TD-11 end devices.
You can download new firmware on the corresponding product page in "Downloads" section.
VEGA SI-13-232 0.7 version
VEGA SI-13-485 0.7 version:
- Fixed an error that was occurring after firmware updating when settings are first time saving;
- Now EU-868 frequency band has a full frequency set by default;
- Analysis of the incoming packets length is reworked.
VEGA SI-11 0.7 version
VEGA SI-12 0.7 version
VEGA SI-21 0.2 version
VEGA TP-11 0.2 version
VEGA TD-11 0.2 version:
- Non-resettable packet counter is added;
- Fixed an error that was occurring after firmware updating when settings are first time saving;
- Now EU-868 frequency band has a full frequency set by default;
- Analysis of the incoming packets length is reworked.

IOT Vega Server was updated to 1.1.2 version

2017-10-26 09:19:45 MSK List of changes:
1. The data base problem is solved: device deleting is correct now;
2. The console isn't represent decripted data from device now. Only size of data is shown.

IOT Vega Pulse was updated to 1.1.1 version

2017-10-20 09:43:38 MSK List of changes:
1. The characteristic "Model of the device of the account" was added;
2. The characteristic "Factory number of the device of the account" was added;
3. The "Accounting device model", "The serial number of the meter", "The date of the next verification" are displayed on the main page of the meter;
4. The Pulse version is displayed in the upper right corner of the page;
5. Fixed bug of filtering devices on the "Reports" tab;
6. Fixed bug of incorrect display of days of the week on charts;
7. The alter_user_resp API command is supported;
8. Most of the external resources became locally;
9. Added the ability to activate the demo button on the auth.html page (described in readme.txt);
10. Changed the style of the "delete" button on modal windows;
11. Minor changes in css styles.

Firmware updates for pulse counters have been released

2017-10-20 05:22:48 MSK New versions of the firmwares is for the pulse counters VEGA SI-12, VEGA SI-13-232 and VEGA SI-13-485.
You can download the new firmware on the page of the corresponding product in the "Downloads" section.
VEGA SI-12 0.6 version:
- Settings for the type of alarm inputs (short / open) was added
VEGA SI-13-232, VEGA SI-13-485 0.6 version:
- Fixed parity error of RS-485/232 interface
- Settings for the type of alarm inputs (short / open) was added

Semtech LoRaLabs has tested the RF performance of Vega BS gateways

2017-10-19 11:30:14 MSK Semtech confirmed the quality and efficiency of Vega-Absolute gateways. The testing of gateways was carried out in Semtech LoRaLabs in France. As a result of testing, an evaluation of Vega BS was delivered: "Semtech LoRaLabs has delivered a positive evaluation of the RF performance of Vega-Absolute LoRa® Gateway V1.0 on the 868 MHz ISM band".
Original text

IOT Vega Admin Tool was updated to 1.1.1 version

2017-09-29 11:06:48 MSK List of changes:
1. Minor changes in the authorization algorithm on the auth.html page;
2. Added the ability to activate the demo button on the auth.html page;
3. The constant demo_user was added to the file config.js;
4. Added the console view function;
5. In the "Device settings" panel, the "enabled channels" form was removed, the content was included in the "regional settings";
6. The first 8 subnet masks are active by default;
7. A bug when binding the device to the user was fixed, the device input field after adding to the list is now cleared;
8. The version of Admin Tool is displayed in the upper right corner of the page;
9. Most of the external resources became locally;
10. The name of the parameter "Max power" is replaced with "Transmit power" (In Gateway properties);
11. The alter_user_resp API command is supported.

IOT Vega Server was updated to 1.1.1 version

2017-09-29 11:03:47 MSK List of changes:
1. New API commands added:
        - to obtain data on the network coverage map
        - to receive and edit the data queue for sending;
2. In the API command handler, it is universally taken into account that any parameter can take the value "null", while maintaining the correctness of the server (requires help with testing from the clients);
3. Fixed problem when editing the parameters of the active user, previously leading to server hangup;
4. The speed of sending packets for Class C devices is higher. Now you can send packets to the device with minimal delays;
5. Added purging of data packets queue for sending when server starts;
6. Passwords for all users transferred to MD5 hash sum, which increased the security of personal data even when the system was compromised;
7. Fixed an issue when sending data to Class C devices. Previously, by mistake, all references were sent at the same DR0 speed;
8. Improvements in ADR functionality have been introduced, which should improve the work of this algorithm;
9. Improvements were made to increase the overall reliability of the server. For example, added functionality for self-testing and solving emerging problems for the device handler. This functionality will develop in the future, which will make our server able to solve some problems on its own;
10. Minor changes in the console output and saving data to the LOG file. Now in the LOG file at the start the server version is fixed;
11. The User Manual and API description has been improved and updated.

Vega LoRaWAN Configurator was updated to 1.0.6 version

2017-09-15 11:52:10 MSK Modification:
1. New devices added: Smart-MC0101, TD-11, TP-11, SI-21;
2. Guard input settings added. Now guard inputs can generate alarms on short or open.

Vega LoRaWAN Configurator was updated to 1.0.5 version

2017-09-05 13:27:15 MSK Modification:
1. Added new deice Vega M-BUS-1;
2. Added extended interface settings for Vega SI-13;
3. Removed channel mask settings.

Firmware updates for pulse counters have been released

2017-09-05 13:24:04 MSK New versions of the firmwares is for the pulse counters VEGA SI-13-232 and VEGA SI-13-485.
You can download the new firmware on the page of the corresponding product in the "Downloads" section.
VEGA SI-13-232 0.5 version
VEGA SI-13-485 0.5 version
Modifications of the 0.5 version:
- Added ability to set interface speeds of 300, 600, 1200 and 2400;
- Added ability to set the number of data bits, parity and number of stop bits;
- Now you can change the interface settings with the command via LoRaWAN;
- There was a team for an extraordinary poll of the connected meter Mercury;
- The readings accumulated by the pulse inputs are now stored in non-volatile memory.

IOT Vega Pulse was updated to 1.1.0 version

2017-09-01 11:31:11 MSK Modification:
1. API IOT Vega Server Rev20 is supported;
2. Minor changes in display styles of the device list, the navigation bar.

IOT Vega Admin Tool was updated to 1.1.0 version

2017-09-01 11:25:18 MSK Modification:
1. API IOT Vega Server Rev20 is supported;
2. Added the console view function;
3. Font Awesome Icons hosted locally;
4. The first 8 subnet masks are active by default;
5. Preffered date rate is DR5 by default;
6. All third-party loadable resources - are loaded from https addresses;
7. Minor changes in the display of the user interface;
8. A bug with editing a device with an absent name has been fixed;
9. Subnet masks from 9 to 16 are hidden

IOT Vega Server was updated to 1.1.0 version

2017-09-01 10:37:34 MSK Modification:
1. Pay attention! This version of the server runs on the updated API (API IOT Vega Server Rev20);
2. Supported work with SSL encryption (settings set the permission to use SSL and the names of files with a certificate and a key);
3. The ADR algorithm (Adaptive Data Rate) has been added. The server changes the speed according to the signal quality of the device;
4. Significantly improved the functionality for working with Class C devices, which increased the overall reliability of the server;
5. A new function is introduced for devices of class C: whether or not to use the queue for sending packets. By default this option is disabled, i.e. Class C devices operate in the "online" mode;
6. The algorithm for working with base stations has been slightly improved in order to increase the reliability of sending data to the device (especially for base stations working via mobile Internet);
7. Fixed bugs and improved functionality for the organization of a "full duplex" base station;
8. Now the server can write LOG files. The settings for writing files are displayed in the configuration file;
9. The volume settings of the information output to the console and LOG appeared;
10. Improved functionality for working with users. Multiple simultaneous connections per user are allowed;
11. The ability to transfer console content via API is added. For each user, you can enable or disable this feature;
12. Improved and updated user manual.

Firmware updates for pulse counters have been released

2017-08-17 06:38:08 MSK New versions of the firmwares is for the pulse counters VEGA SI-11 and VEGA SI-12.
You can download the new firmware on the page of the corresponding product in the "Downloads" section.
SI-11 version 0.5
SI-12 version 0.4

IOT Vega Admin Tool was updated to 1.0.3 version

2017-07-27 09:50:01 MSK Modification:
1. Fixed bug while ABP devices were edited;
2. Fixed bug when comparing the entered frequency plan with the specified templates;
3. Changed some headers on the device editing form;
4. Updated algorithm for sending changed parameters while editing devices;
5. The first 3 channel masks are active by default

Vega LoRaWAN Configurator was updated to 1.0.3 version

2017-07-26 11:49:38 MSK Modification:
1. Added network coverage signal quality indicator;
2. Fixed error in element temperature on russian version;
3. Added support of six plugged devices for SI-13;
4. Datarate setting changed from DR0 to DR0 SF12 etc.

Firmware updates for pulse counters have been released

2017-07-24 11:47:56 MSK You can download the new firmware on the page of the corresponding product in the "Downloads" section.
SI-11 version 0.4
SI-12 version 0.3
SI-13-232 version 0.4
SI-13-485 version 0.4

IOT Vega Pulse was updated to 1.0.2 version

2017-07-19 11:39:08 MSK Modification:
1. Changed the greeting text;
2. Standard html input type "date" replaced by datepicker angular-strap.".

IOT Vega Admin Tool was updated to 1.0.2 version

2017-07-18 11:31:28 MSK Modification:
1. Changes are made to validate the devAddr;
2. Modal window for editing the device - Fixed the title "Gateway settings" -> "Device settings";
3. The default value of rxWindow is changed to "1" -> "2";
4. Changed frequency plan RU868;
5. Renamed the headers "MAC" -> "Gateway ID".

IOT Vega Server was updated to 1.0.4 version

2017-07-17 11:29:15 MSK Modification:
1. Fixed error with CLASS_C downlinks on linux platforms;
2. ABP device addres possible values expands to range from 0x00000000 to 0xFFFFFFFF;
3. Fixed error with custom RX window periods for CLASS_C devices;
4. Fixed procedure for manage gateway parameters;
5. When user create new device it is added to this corresponding user;
6. Fixed some moments with debug console output:
- time of downlink is now correct (is used time when gateway confirm packet to sending).

Conformity certificates were obtained

2017-07-14 06:40:35 MSK For the such devices as Vega SI-11, Vega SI-12, Vega SI-13, and base stations, certificates of conformity have been obtained. The tests of the products successfully confirmed such parameters as operating temperature range, IP65 enclosure protection level, stability for hard conditions of placement and normal transportation conditions, and also confirmed compliance with the technical regulations of the Customs Union 020/2011 "Electromagnetic Compatibility of Technical devices". Certificates can be found on the page of each product in the "Certificates" section, where they can be read in detail. For example, on the product page VEGA SI-11.